00 00 249 BMW engine oil service (M60/M62/M73): Installation:

Tightening torque, refer to OIL FILTER AND LINES

Fig 1: Removing Oil Filter Cover

Remove oil filter from oil filter cover.

Note direction of installation of oil filter insert.

Oil filter insert must locate in oil filter cover.

Fig 1: Noting Direction Of Installation Of Oil Filter Insert

Replace sealing ring and coat with oil.

Fig 1: Locating Sealing Ring

After draining oil from oil-filter housing, unscrew oil drain plug or draw out oil with a vacuum unit.

Replace sealing ring.

Fig 1: Locating Drain Plug

Pour in engine oil.

Switch on engine and run at idle until oil indicator lamp goes out.

Stop engine and check oil level.