51 43 201 Removing and installing or replacing trim for front left or right roof pillar
WARNING: This page is about a different car, the 2001 BMW 740iL and 2001 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Version with head airbag (ITS): Follow safety instructions for working on cars with airbag systems, refer to 51 00 ... SAFETY INSTRUCTIONS FOR WORKING ON CARS WITH AIRBAG SYSTEMS
CAUTION:
Do not use sharp-edged tools to remove trim (risk of damage to head air bag).
ITS Inflatable Tubular Structure (head airbag).
Version with head airbag (ITS):
Remove edge protection from A-pillar finisher.
Lift out clip (1).
Version with head airbag (ITS):
Unscrew bolt (1).
Installation:
Ensure that clip is perfectly seated (2).
Remove A-pillar finisher by pulling inwards and upwards.
Installation:
If necessary, replace damaged clips and grommets.
Version with head airbag (ITS):
Installation:
Cloth (1) on grommet (2) must be fitted to head air bag (3) otherwise the clip (4) can damage the head air bag.