34 11 Front Wheel Brakes E38
FRONT WHEEL BRAKES E38 TECHNICAL SPECIFICATION
| Different thicknesses on brake linings | max. mm | 0.01 |
| Radial runout of brake lining (measured at largest phi of brake lining) | ..... | ..... |
| Disc installed | max. mm | ..... |
| Disc removed | max. mm | ..... |
| Surface roughness of braking surfaces (precision-turned) | Ra mu | 0.5... 3.5 |
| Brake disc diameter | mm | 725tds,728i/iL,730d,730i/iL,735i/iL: 316; 740i/iL: 324; 740d,750i/iL:334 |
FRONT WHEEL BRAKES E38 TECHNICAL SPECIFICATION
| Wear warning from residual lining thickness | mm | 3.0 |
| Brake disc minimum thickness (MIN TH) is stamped in brake disc shell | mm | 725tds, 728i/iL, 730d, 730i/iL, 735i/iL:26.4 740i/iL:28.4 750i/iL:30.4 |
| Max. machining limit per friction ring side (M models must not be machined) |
mm | 0.8 |