54 12 210 Removing and installing complete sliding/tilting sunroof (frame): Installation:

Removing and installing ceiling cover, see 51 44 01151 44 011 REMOVING AND INSTALLING/REPLACING HEADLINER (WITH SLIDE/TILT SUNROOF)

Remove water drain hoses (1) at front/rear. Unfasten Omega clips (2).

Fig 1: Removing Water Drain Hoses At Front/Rear

Release screws (1) at front and (2) on left/right

Fig 2: Releasing Screws At Front And On Left/Right

Unhook clips on left/right and lower back of sunroof frame a little.

Fig 3: Unhooking Clips On Left/Right

Fold up back of frame until rear clips can be unfastened.

Slide sunroof frame backwards and remove through rear right door.

Fig 1: Removing Through Rear Right Door

Insert sliding/tilting sunroof frame in sheet metal slot at front.

Fig 1: Inserting Sliding/Tilting Sunroof Frame In Sheet Metal Slot At Front