36 10 Wheels Two-part alloy wheels
WHEELS TWO-PART ALLOY WHEELS TECHNICAL SPECIFICATION
| Max. radial runout of tire Rim with tire | Max. mm | 1.3 |
| Max. axial runout or tire Rim with tire | Max. mm | 1.5 |
| Max. radial runout out rim | Max. mm | 0.5 |
| Max. axial runout of rim | Max. mm | 0.5 |
| Max. imbalance for each side (before balancing) |
Max. g | 90 for clamp weights 120 for stick-on weights |
| Permissible residual imbalance for each side (after balancing) |
Max. g | 4 |
| Elimination of imbalance: Up to 60 g with one weight Or more than 60 g with two weights |
..... | ..... |