00 00 M10 and M10 x 1 - maximum tightening torques acc. to BMW GS 90003-2
M10 and M10 x 1 -MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| ..... | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| Scope of applicability of tightening torques, Refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 |
Surface color / (surface coating) | ..... | ..... | ..... |
| M10 thread | Yellow (ZN) | M10 8.8 | ..... | 47 Nm |
| ..... | Silver (ZNS) | M10 8.8 | ..... | 38 Nm |
| ..... | Yellow (ZN) | M10 10.9 | ..... | 66 Nm |
| ..... | Silver (ZNS) | M10 10.9 | ..... | 56 Nm |
| ..... | Yellow (ZN) | M10 12.9 | ..... | 79 Nm |
| ..... | Silver (ZNS) | M10 12.9 | ..... | 62 Nm |
| M10x1 thread | Yellow (ZN) | M10x1 8.8 | ..... | 54 Nm |
| ..... | Silver (ZNS) | M10x1 8.8 | ..... | 41 Nm |
| ..... | Yellow (ZN) | M10x1 10.9 | ..... | 75 Nm |
| ..... | Silver (ZNS) | M10x1 10.9 | ..... | 60 Nm |
| ..... | Yellow (ZN) | M10x1 12.9 | ..... | 91 Nm |
| ..... | Silver (ZNS) | M10x1 12.9 | ..... | 67 Nm |