52 13 013 Adjusting Bowden cable for longitudinal adjustment of left or right front seat (normal / manual)
Remove front seat, refer to 52 13 000 REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT (NORMAL / MANUAL) .
Remove clip from Bowden cable sleeve.
1st person presses left / right unlocking lever (1) down (towards cushion) to ensure that locking pins (2) have no clearance when vehicle is in motion.
NOTE:
If the clip (1) is bent, replace it.
2nd person pulls on Bowden cable sleeve (3) at same time, pushing up clip (1).