Light/dark limit of headlights in headlight aimer

e  Adjustment dimension, headlights:

• As per type plate on headlight housing in % (e.g.: 1.0 % = 10 cm / 10 m = 10 on headlight aimer).

  Adjustment dimension, fog lights:

• All vehicles 2.0 % = 20 cm / 10 m = 20 on headlight aimer.

H  Height of center of headlight above parking surface.

h  H - e = height of marking line above parking surface.

+  Central mark = center point of high-beam headlight.

M  Marking line of headlamp aimer.

S  Parking surface of vehicle and headlight aimer.

Adjustment dimension (e) is only valid for EUR. Observe differing national regulations.