63 12 002 Removing and installing or replacing complete right headlight: Notes

Remove turn signal, refer to 63 13 150 REMOVING AND INSTALLING/REPLACING COMPLETE FRONT LEFT OR RIGHT TURN SIGNAL LAMP  .

Lift up unlocking unit and remove connector.

Fig 1: Lifting Up Unlocking Unit And Removing Connector

Lift up locking hook, slide finisher towards center and lift out.

Fig 2: Lifting Up Locking Hook

Slide locking unit inwards. Unscrew bolts.

Fig 3: Sliding Locking Unit

Loosen nuts (1), unfasten screws (2) and relieve tension on adjusting nuts (3). Lift headlights forwards to remove.

Fig 4: Loosening Nuts (1), Unfastening Screws (2) And Relieving Tension On Adjusting Nuts (3)