54 12 117 Replacing seal for glass sliding/tilting sunroof lid

Remove glass slide/tilt sunroof lid, refer to 54 12 115 REMOVING AND INSTALLING GLASS SLIDING/TILTING SUNROOF LID  .

Remove seal (1) from glass slide/tilt sunroof lid (2).

Fig 1: Removing Seal From Glass Slide/Tilt Sunroof Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Coat guide channel (1) and seal (2) with soapy water.
   Fig 2: Identifying Guide Channel And Seal

   Courtesy of BMW OF NORTH AMERICA, INC.
2. Begin installation at rear center, with seal (3).
3. Do not pull seal too tightly in radii (leakage).