Coding ULF Control Module to Vehicle

After installing the ULF Kit, the vehicle should be re-coded with DISPlus/GT1 SW 33 or higher, using the "Retrofit" path to ensure that the system works properly with the systems currently installed in the vehicle. The recoding is done automatically when using the following "retrofit" procedure:

Example for coding E46 with ULF installed:

• Connect DIS or GT1 to vehicle (with SW 33 or higher installed).
• Turn on ignition.
• Select "Coding ZCS".
• Series: "E46 Series".
• Path: "2 Retrofit".
• System: "ULF Universal charging and Handsfree facility".
• Follow the on screen requests to activate the coding procedure.