Land Rover (1995-04)

WARNING: Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a "live" module. See appropriate AIR BAG RESTRAINT SYSTEM article.

APPLICATION - LAND ROVER

Make/Model	Year	Location	Table
Discovery	1995-99	D-P	Land Rover-1
Discovery Series II	2000-04	D-P	Land Rover-1
Freelander	2002-04	D-P	Land Rover-1
Range Rover	2003-04	D-P2, SI, HI	Land Rover-2
	1999-02	D-P, SI	Land Rover-1
	1995-98	D-P	Land Rover-1

D-P: Driver's & Passenger's Side
D-P2: Driver's & Passenger's Side (Dual-Stage)
DS: Driver's Side
HI: Head Impact
KI: Knee Impact
SI: Side Impact
PS2: Passenger's Side (Dual-Stage)

Land Rover-1

Replace After Deployment

Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)

Comments

Deployed air bag modules; Air bag diagnostic control unit; Air bag wiring harness⁽¹⁾; Rotary coupler; Front crash sensors⁽²⁾; Deployed seat belt pretensioners; Seat back foam & cover (if side air bag deployed);

Air bag module & mounting surfaces; Crash sensors & mounting brackets; Steering column & wheel; Wiring harness & connectors; Front seat frames (side impact air bag modules); Seat belts & mounting points;

After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; If side impact air bags have deployed, replace seat foam and air bag cover.;

⁽¹⁾	Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness.

⁽²⁾	Applicable to some 1999-2002 North American models.

Land Rover-2

Replace After Deployment

Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)

Comments

Deployed air bag modules; Air bag diagnostic control unit; Fly leads⁽¹⁾; Rotary coupler; Side crash sensors (replace both sides)⁽²⁾; Deployed seat belt pretensioners; Head air bag retaining clips⁽²⁾; Headliner trim panel⁽²⁾;

Air bag module & mounting surfaces; Sensors & mounting brackets; Steering column & wheel; Wiring harness & connectors; Front seat frames (side impact air bag modules); Seat belts & mounting points;

After vehicle is repaired, ensure AIR BAG warning light is functioning properly.; If side impact air bags have deployed, replace seat foam and air bag cover.;

⁽¹⁾	Fly leads (where applicable) connecting air bags and pretensioners to air bag system wining harness.

⁽²⁾	If side or head air bags have deployed.