11 24 Connecting Rods and Bearings
CONNECTING RODS AND BEARINGS TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10/M30 | Replace, wash and oil screws | 55 Nm | |
| M20/M21/M40/M41/M42/M43/M43TU/M44/M47/M47TU/M50/M51/M52/M52TU/M54/M56/M57/M57TU/S52/S50 US/M70/S70/M73/N40/N42/N45/N46/N62/N73/N62S | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° | |||
| M60/M62 | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 80 ° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 85 ° |