LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2000 >> 323Ci 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - Repair >> Vibration Damper >> 11 23 010 Removing and installing or replacing vibration damper (M52TU / M54 / M56) >> Version 1

Version 1

Vibration damper and hub for vibration damper are two parts:

Unscrew vibration damper bolts and take off vibration damper.

Fig 1: Unscrewing Vibration Damper Bolts
G03163993Courtesy of BMW OF NORTH AMERICA, INC.


Vibration damper and hub for vibration damper are two parts:

Installation: 

Align locating bore in vibration damper to dowel pin.

Install and tighten down screws.

Tightening torque, refer to 11 23 3AZ in ENGINE - TIGHTENING TORQUES .

scientia non olet · About LEMON Manuals