Removal & Installation (7-Series)

Move steering column fully down. Place rags over steering column to prevent scratching instrument cluster lens. Remove 2 screws at top of instrument cluster hood. See Fig 1 . Tilt cluster down to access connectors. See Fig 2 . Disconnect electrical connectors. Remove instrument cluster. To install, reverse removal procedure.

Fig 1: Removing Instrument Cluster Screws (7-Series Shown; Other Models Are Similar)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Removing Instrument Cluster (7-Series Shown; Other Models Are Similar)

Courtesy of BMW OF NORTH AMERICA, INC.