Anti-Squeak/Corrosion Paste

Bostik NEVER-SEEZ(R) to prevent disc brake squeaking. It is applied on cleaned recesses, pressure surfaces of piston crowns, brake pad backplates and possibly transfer plates - but not on friction liners.

To prevent corrosion between the ABS impulse sensor and the hole in the wheel suspension component, apply a thin coat of Bostik NEVER-SEEZ(R) to cleaned sensor and hole before assembly.

Bostik NEVER-SEEZ(R) Part No. NSBT-16

See S.I. Bulletins B 34 02 94, B 34 05 98, and B 34 03 00.