Receiving/Accepting a Call

The call ringer in the Bluetooth™ mobile phone is audible when an incoming call signal is received. At the same time, the signal is sent via the Bluetooth™ interface in the mobile phone to the Bluetooth™ antenna in the vehicle. The ULF receives the incoming ring/call signal via the Bluetooth™ antenna and mutes the radio. The incoming ring/tone signal is then also transmitted to the vehicle speakers.

The following options are available for accepting a call:

3 Series without Display Screen: 

• Press send/receive ™ button on MFL (Steering Wheel).
• Press send/receive ™ button in the center console.
• Press send/receive key on mobile phone.

5 Series and X5 SAV without Display Screen: 

• Press send/receive ™ button on MFL (Steering Wheel).
• Press send/receive key on radio.
• Press send/receive ™ button on the oddment tray (Center Console).
• Press send/receive key on mobile phone.

Vehicles with Display Screen: 

• Press send/receive ™ button on MFL (Steering Wheel).
• Press send/receive ™ button on the oddment tray (Center Console).
• Select the green phone symbol on the Display Screen.
• Press send/receive key on mobile phone.