51 47 151 Removing and installing/replacing trunk wheel housing trim, left

1. Remove and install flap in luggage compartment trim, left and right, refer to 51 47 172 REMOVING AND INSTALLING/REPLACING FLAP IN LUGGAGE COMPARTMENT TRIM, LEFT OR RIGHT .

Version with ski bag:

Release expansion rivet (1).

Remove trunk wheel housing trim (2), lift over lashing eye (3) and lift out of ski bag frame (4).

Installation: 

1. First feed into ski bag frame (4).
   Fig 1: Removing Trunk Wheel Housing Trim

   

Replacement only (version with ski bag):

Release plastic screw fitting (1) and detach trim panel components (2) and (3).

Installation: 

1. Plastic screw fitting (1) is only pressed together during installation.
   Fig 2: Pressing Plastic Screw Fitting

   

Version with ski bag: Release expansion rivet (1).

Remove trunk wheel housing trim (2), lift over lashing eye (3) and lift out of ski bag frame (4).

Installation: 

1. First feed into ski bag frame (4).
   Fig 3: Removing Trunk Wheel Housing Trim

   

Replacement only (version with ski bag):

Release plastic screw fitting (1) and detach trim panel components (2) and (3).

Installation: 

1. Plastic screw fitting (1) is only pressed together during installation.
   Fig 4: Pressing Plastic Screw Fitting