LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1998 >> 540i Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Stabilizer Link >> Removal & Installation

Removal & Installation

  1. Unfasten stabilizer link from stabilizer. See Fig 1.
  2. Remove stabilizer link (1). See Fig 2.
  3. To install, reverse removal procedure. Replace nut (3). Use washer (2). See Fig 2. Tighten nut to specification. See TORQUE SPECIFICATIONS .
  4. Replace nut on stabilizer link to stabilizer. Tighten nut to specification. See TORQUE SPECIFICATIONS .
Fig 1: Identifying Stabilizer Connection
G00148268Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing Stabilizer Link
G00165553Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals