00 11 500 Checking/topping up fluid level in automatic transmission (A5S 440Z)

CAUTION: Use only the approved automatic transmission fluid in this automatic transmission.

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Fig 1: Identifying Automatic Transmission Fluid Filler Plug (A5S 440Z)

Courtesy of BMW OF NORTH AMERICA, INC.

Topping up transmission after a repair:
Move selector lever to "P" position.

Stand vehicle on a level surface and secure and rolling off.

Open filler plug (1).

Installation:
1. Replace sealing ring.
Top up transmission fluid until it emerges from filling orifice.

Start engine.

Replenish transmission fluid until it emerges from filling orifice.

Insert filler plug (1).

Tightening torque, see TORQUE SPECIFICATIONS .

Press brake pedal to floor and shift through all gears several times at idle speed.

Connect BMW Diagnosis and Information System (DIS) or BMW MoDiC to vehicle.

Carry out fluid level check in accordance with instructions.
Checking fluid level:
Connect BMW Diagnosis and Information System (DIS) or BMW MoDiC to vehicle.

Carry out fluid level check in accordance with instructions.