Disc Brake Specifications
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Front Brakes | |||
| Disc Diameter | |||
| Except 850CSi | 12.75 (324) | ||
| 850CSi | 13.58 (345) | ||
| Maximum Different Thicknesses On Brake Linings | .0004 (.01) | ||
| Maximum Top Runout Of Brake Surface | |||
| Disc Installed | .008 (.2) | ||
| Disc Removed | .002 (.04) | ||
| Minimum Thickness | |||
| Except 850CSi | 1.118 (28.4) | ||
| 850CSi | 1.197 (30.4) | ||
| Wear Warning From Residual Lining Thickness | .118 (3) | ||
| Rear Brakes | |||
| Disc Diameter | |||
| Except 850CSi | 12.75 (324) | ||
| 850CSi | 12.91 (328) | ||
| Maximum Different Thicknesses On Brake Linings | .0004 (.01) | ||
| Maximum Top Runout Of Brake Surface | |||
| Disc Installed | .008 (.2) | ||
| Disc Removed | .002 (.04) | ||
| Minimum Thickness | |||
| Except 850CSi | .409 (10.4) | ||
| 850CSi | .724 (18.4) | ||
| Wear Warning From Residual Lining Thickness | .118 (3) | ||
| Parking Brake | |||
| Diameter | 7.1 (180) | ||
| Min. Liner Thickness | .059 (1.5) | ||
| Max. Radial Runout Of Braking Surface | .004 (.1) | ||