21 21 Clutch Disc And Drive Plate
CLUTCH DISC AND DRIVE PLATE TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Work instruction | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | ||
| Clutch to flywheel With ZNS bolts |
Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail |
||||
| E60 S85, E61 S85 | Jointing torque | 15 Nm | |||
| Torque angle | 25° | ||||
| N52, N53, M47T2, N46T, N54, E92 N54 N46T, N43, N45K, N47, M57T2 | M8 10.9 | Jointing torque | 15 Nm | ||
| Torque angle | 90° +/- 5° | ||||