00 00. Front and rear brake linings: checking lining thickness with measuring gauge. If linings are replaced: cleaning brake shafts, checking brake disk thickness and surface, applying grease to wheel centering on alloy wheels. If rear linings are replaced: checking parking brake linings: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW 325xi, 2005 BMW 325i, and 2005 BMW 325Ci. However, it is still accessible from the selected car via links, so may be relevant.
Check brake lining thicknesses with measuring gauge at front and rear. For subsequent measurement, refer to:
- For 1992-2001 models, refer to DISC BRAKE SPECIFICATIONS .
- For 2002-2004 models, refer to DISC BRAKE SPECIFICATIONS .
NOTE:
Issue a separate invoice for replacing the brake linings.
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to:
NOTE:
- Clean brake shafts.
- Replace brake linings if they drop below minimum thickness, refer to:
- For 1992-2001 models, refer to DISC BRAKE SPECIFICATIONS .
- For 2002-2004 models, refer to DISC BRAKE SPECIFICATIONS .
- Replace brake disks if they drop below minimum thickness and in event of scoring, heat cracks, lateral runout or thickness difference, refer to:
- For 1992-2001 models, refer to DISC BRAKE SPECIFICATIONS .
- For 2002-2004 models, refer to DISC BRAKE SPECIFICATIONS .
- Apply a thin coat of grease to wheel centering on light alloy wheels.