17 40 000 Removing and installing/replacing complete supplementary fan (with fan cowl)

Remove complete front bumper.

Disconnect plug connection (1).

Turn plug (2) in direction of arrow and remove from air duct at front (4).

Feed cable loom (3) out of fixtures.

Fig 1: Identifying Plug Connection (1) Plug (2) Cable Loom (3) And Air Duct (4)

Release screws (1) and remove air duct at front (2).

Installation:

Ensure Bowden cable guide (3) is correctly seated.

Fig 2: Identifying Screws (1) Air Duct (2) And Bowden Cable Guide (3)

Unscrew nuts (1).

Remove supplementary fan complete with fan cowl (2) in direction of arrow.

Fig 3: Removing Supplementary Fan Complete With Fan Cowl