51 45 050 Removing and installing trim for upper section of instrument panel

Necessary preliminary tasks:

Release screws (1).

Fig 1: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect Bowden cable (1) for temperature-controlled ventilation.

Fig 2: Disconnecting Bowden Cable For Temperature-Controlled Ventilation

Courtesy of BMW OF NORTH AMERICA, INC.

Lift off cap (1) and unfasten screw. Unfasten screws and remove left oddments tray.

Fig 3: Lifting Off Cap And Unfasten Screw And Remove Left Oddments Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip rubber gaiter for steering column.

Fig 4: Unclipping Rubber Gaiter For Steering Column

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 5: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Lift trim for upper section of instrument panel upwards and remove through passenger door.

Fig 6: Lifting Trim For Upper Section Of Instrument Panel Upwards And Remove Through Passenger Door

Courtesy of BMW OF NORTH AMERICA, INC.

Version up to 09/97:

Installation:

Left/right plastic guides (1) and center (2) must be installed.

Fig 7: Identifying Left/Right Plastic Guides And Center

Courtesy of BMW OF NORTH AMERICA, INC.

Version from 09/97:

NOTE: Plastic guides are not installed with newer mountings (1 and 2).

Fig 8: Identifying Plastic Guides

Courtesy of BMW OF NORTH AMERICA, INC.