12 12 011 Replacing all spark plugs (M60, M62): Installation

1. Tighten down spark plugs with special tool 12 1 171 and special tool 12 1 200 (torque limiter).
2. Without special tool 12 1 200, observe tightening torque. See ENGINE ELECTRICAL SYSTEM - TIGHTENING TORQUE .
3. Tightening torque,
4. refer to 12 12 1AZ in ENGINE ELECTRICAL SYSTEM - TIGHTENING TORQUE .

Fig 1: Identifying Special Tool 12 1 200

Courtesy of BMW OF NORTH AMERICA, INC.