LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1997 >> 540i Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> Rear Manually Operated >> 51 34 420 Removing and installing/replacing trim on window frame of rear door (front), left or right (Protection)

51 34 420 Removing and installing/replacing trim on window frame of rear door (front), left or right (Protection)

Remove rubber seal for door window glass, rear left or right,

refer to 51 34 211 REPLACING RUBBER GUIDE FOR REAR LEFT OR RIGHT DOOR WINDOW .

Open rear door.

Detach rubber seal (1) from rear of door.

Installation 

  1. First press pimples on rubber seal into bores (2).
Fig 1: Detaching Rubber Seal From Rear Of Door
G03153846Courtesy of BMW OF NORTH AMERICA, INC.

Detach and remove rubber seal (1) at front.

Installation 

  1. Coat rubber seal with rubber protection coating agent (sourcing reference: BMW Part).
Fig 2: Detaching And Removing Rubber Seal At Front
G03153847Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew bolts (1). Lift out trim (2) at rear and remove towards front.

Fig 3: Lifting Out Trim At Rear And Remove Towards Front
G03153848Courtesy of BMW OF NORTH AMERICA, INC.

Installation 

  1. If necessary, replace faulty plastic nuts (1) and insulating material (2).
Fig 4: Replacing Faulty Plastic Nuts And Insulating Material
G03153849Courtesy of BMW OF NORTH AMERICA, INC.

Installation 

  1. Install trim strip (3) to align trim (1) and rubber seal (2).
  2. Press trim (1) upwards against trim strip (3) and screw into place.
  3. Remove trim strip (3) again.
Fig 5: Pressing Trim Upwards Against Trim Strip And Screw Into Place
G03153850Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals