LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1997 >> 318ti Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Air Bag Restraint Systems) >> Removal & Installation >> Seat Belt PRETENSIONERS (Coupe) >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 BMW M3, 2003 BMW 330xi, 2003 BMW 330i, 2003 BMW 330Ci, and 2003 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove front seat and B-pillar trim. Open cable strap for plug on seat belt pretensioner. Disconnect electrical connector from seat belt pretensioner. Remove seat belt pretensioner mounting bolt. Note position of seat belt pretensioner on seat. Remove seat belt pretensioner.
  3. To install, reverse removal procedure. Replace micro encapsulated seat belt pretensioner mounting bolt and cable strap. Tighten seat belt pretensioner mounting bolt to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals