Front and (if necessary) rear disk brake linings: remove and install, check total thickness. Clean brake shafts. If necessary, replace linings. Brake disks: Check surface and thickness. Grease wheel centering mount on alloy wheels

Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to

• 34 11 000 REMOVING AND INSTALLING/REPLACING BRAKE LININGS ON BOTH FRONT DISK BRAKES ,
• 34 21 200 REMOVING AND INSTALLING OR REPLACING BRAKE LININGS ON BOTH REAR DISK BRAKES .

Replace brake linings if:

• Linings drop below minimum thickness (refer to DISC BRAKE SPECIFICATIONS )

Replace brake disks if:

• Disks drop below minimum thickness (refer to DISC BRAKE SPECIFICATIONS )
• Presence of:
  • Scoring
  • Heat cracks
  • Lateral runout
  • Thickness difference