35 51 001 Removing and installing or replacing parking brake foot pedal: Installation:

Replace retaining pin (1).

Fig 1: Replacing Retaining Pin

Lever out gas strut (1).

Remove retainer (2).

Remove parking brake pedal.

Fig 2: Identifying Gas Strut And Retainer

Check bearing bush (1) and replace if necessary.

Coat anti-friction faces with grease.

Fig 1: Checking Bearing Bush

Arrangement of interlock:

1. Circlip.
2. Recoil spring.
3. Release lever.
4. Detent.
   Fig 2: Identifying Circlip, Recoil Spring, Release Lever And Detent