Instrument Cluster
WARNING:
Before any repairs are performed, disconnect and shield battery ground. Disconnect air bag connector at lower steering column. Use caution when working around steering column (air bag could deploy). See AIR BAG RESTRAINT SYSTEM
article.
- Remove steering wheel. See AIR BAG RESTRAINT SYSTEM article. Remove 2 screws at top of instrument cluster hood. Lift out instrument cluster slightly and pull cluster toward steering column.
- Push levers retaining instrument cluster connectors and unplug connectors. To install, reverse removal procedure. Levers retaining instrument cluster connectors must be up when inserting connectors.
NOTE:
If instrument cluster is replaced, coding plug on back of cluster may need to be replaced and a label showing odometer reading of old instrument cluster attached to left door pillar.