Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
| Center Bearing Mounting Bolts | 16 (22) | |
| Drive Shaft-To-Differential Input Flange (With CV Joint) | ||
| 8 mm Ribbed Nut | 32 (43) | |
| 8 mm Compression Nut | 23 (31) | |
| 10 mm Ribbed Nut | 66 (89) | |
| 10 mm Compression Nut | 47 (64) | |
| Drive Shaft-To-Differential Input Flange (With Universal Joint) | ||
| 10 mm Ribbed Nut | 66 (89) | |
| 10 mm Compression Nut | 47 (64) | |
| Drive Shaft-To-Transmission | ||
| 10 mm (8.8 Grade) Bolts | 36 (49) | |
| 10 mm (10.9 Grade) Bolts | 47 (64) | |
| 12 mm Bolts | 74 (100) | |
| Transmission Crossmember-To-Body | ||
| 8 mm Bolt | 17 (23) | |
| 10 mm Bolt | 31 (42) | |
| INCH Lbs. (N.m) | ||
| Clamping Sleeve | 89 (10) | |