LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1989 >> 735iL >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Overhaul - ZF 4HP22 & 4HP24 >> Component Disassembly & Reassembly >> Valve Body >> Valve Body Reassembly

Valve Body Reassembly

  1. Reverse disassembly procedure to reassemble. Fit and align divider plate assembly to front valve body ensuring manual valve lug locates in divider plate channel.
  2. Holding front valve body firmly to divider plate, invert assembly but DO NOT tighten securing screws. Fit and seat valve body to divider plate oil feed pipe.
  3. Fit and align upper left valve body to divider plate, but DO NOT tighten screws. Fit and align upper right valve body to divider plate, but DO NOT tighten screws.
  4. Invert main valve body assembly and fit rear valve body.
scientia non olet · About LEMON Manuals