LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1989 >> 735iL >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Overhaul - ZF 4HP22 & 4HP24 >> Component Disassembly & Reassembly >> Clutches "C" & "F" >> Reassembly

Clutches "C" & "F": Reassembly

  1. Replace all "O" rings and seals. Lubricate all components with ATF for ease of reassembly.
  2. Insert diaphragm spring with curved surface facing up in clutch housing "C" and "F". Ensure all clutch plates and discs are installed in proper order.
  3. Connect cylinders "C" and "F" by turning housing. Collar on output shaft must protrude approximately .4" (10 mm).