LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1989 >> 735iL >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Removal & Installation >> Drive Axles & Bearings >> Removal

Drive Axles & Bearings: Removal

  1. Raise and support vehicle. Remove wheel and brake drum assembly. Remove drive shaft. Loosen castellated nut (6-cyl. models) securing flange to drive axle. Using a puller, remove flange.
  2. On all models, install castellated nut on axle shaft and drive out drive axle using a soft-headed mallet. Remove bearings and seals. Remove spacer sleeve and shim (if equipped).
scientia non olet · About LEMON Manuals