LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1988 >> 325is Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair (E30) >> Removal & Installation >> Caliper Assembly >> Installation

Caliper Assembly: Installation

  1. To install, reverse removal procedure.
  2. Make sure of correct location of brake pad wear indicator wires with tab of dust cap. Rubbing of the wires in the wheel rim must always be prevented.
  3. Tighten caliper mounting bolts to specification. See TORQUE SPECIFICATIONS  .
  4. Bleed brakes. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals