LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1988 >> 325is Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair (E30) >> Overhaul >> Brake Caliper >> Reassembly

Brake Caliper: Reassembly

  1. Coat piston and caliper bore with brake assembly lubricant.
  2. Install sealing cover in rear annular groove of cylinder bore.
  3. Install dust boot on piston.
  4. Using wooden block, install piston and dust boot. Ensure piston is not tilted when installing. See Fig 1 .
  5. Balance of assembly is reverse of disassembly.
Fig 1: Pressing In Piston
G00103300Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals