Disc Rotor: Remove & Replace
WARNING: This page is about the 325es Automatic, 4HP22EH, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both,Rear | 1.2 | B | ||
| Front,Inboard Mtd,Both | 2.0 | B | ||
| Front,Inboard Mtd,One Side | 1.1 | B | ||
| Front,Outboard Mounted,Both | 1.2 | B | ||
| Front,Outboard Mounted,One Side | 0.7 | B | ||
| One Side,Rear | 0.7 | B | ||
| Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.3 | B | ||
| One | 0.5 | B | ||