LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1984 >> 733i Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engines >> Transmission, Engine, Manifolds & Cylinder Head >> Engine >> Removal

Transmission, Engine, Manifolds & Cylinder Head: Engine: Removal

  1. Remove hood. Disconnect battery cables from battery. Remove transmission. Remove splash guard from under engine. Drain cooling system and remove radiator. Remove power steering pump (leaving hoses connected) and secure away from engine.
  2. If equipped, remove A/C compressor (with hoses connected) and secure away from engine. Remove accelerator cable. If equipped, remove cruise control cable from engine.
  3. Label and disconnect all electrical and ignition wiring that might interfere with engine removal. Be sure to disconnect wiring harness in glove box, and pull through hole in firewall.
  4. Label and disconnect all coolant, ventilation, fuel, and vacuum hoses (or lines) that might interfere with engine removal. Remove air cleaner with air flow sensor.
  5. Remove nuts from engine mounts. Ensure no wiring, hoses or lines are attached to engine. Attach a lifting chain and hoist to engine. Carefully lift engine from vehicle.
scientia non olet · About LEMON Manuals