LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1984 >> 733i Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engines >> Camshaft >> Timing Belt Cover >> Removal (2.7L)

Removal (2.7L)

  1. Remove all drive belts. Remove pulley and vibration damper. Hold crankshaft in place and remove center bolt from vibration damper hub.
  2. Using puller, remove vibration damper hub from crankshaft. Remove crankshaft sprocket from crankshaft using a puller. Hold intermediate shaft sprocket in place and remove attaching bolt, washer and sprocket.
  3. Remove 3 oil pan-to-cover bolts, then loosen remaining oil pan bolts. Remove remaining attaching bolts, then remove timing belt cover.
scientia non olet · About LEMON Manuals