LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1984 >> 733i Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engines >> Camshaft >> Timing Belt & Sprocket >> Removal (2.7L)

Removal (2.7L)

  1. Remove distributor cap and rotor, then remove cover surrounding distributor. Turn crankshaft to position No. 1 piston on TDC of compression stroke.
  2. Ensure timing marks on vibration damper and pointer are aligned. Arrow on camshaft must be aligned with timing mark on cylinder head. See Figure.
  3. Remove timing belt cover. Loosen tensioner and position away from timing belt to relieve tension. Tighten tensioner adjusting bolt to keep tensioner in retracted position.
  4. If installing same timing belt, mark normal direction of rotation on timing belt before removing. Remove timing belt.
scientia non olet · About LEMON Manuals