LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1984 >> 733i Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engines >> Camshaft >> Rocker Arm Assembly >> Removal (2.7L)

Removal (2.7L)

  1. Remove camshaft. Set up special tool (11 1 060) on special tool (00 1 490) and mount cylinder head with one head bolt. Remove sprocket retainer bolt and take off sprocket. Remove front and rear rocker arm plugs and guide plate. Remove rocker arm spring clamps.
  2. To remove exhaust rocker arm, No. 6 cylinder must overlap. Push in rocker arms of No. 1 cylinder and turn camshaft on adapter to intake side until all rocker arms are relaxed.
  3. To remove intake rocker arm shafts, turn camshaft on adapter to exhaust side and move rocker arms until all rocker arms are relaxed. Pull out rocker arm shaft. Replace worn rocker arm shafts and rocker arms.
scientia non olet · About LEMON Manuals