LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1983 >> 733i Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Trailing Control Arm >> Removal (528e, 533i, 633CSi & 733i)

Removal (528e, 533i, 633CSi & 733i)

  1. Raise and support vehicle. Remove hub cap, cotter pin and castle nut. Disconnect parking brake cable at parking brake lever. Disconnect output shaft from rear axle shaft. Remove wheel assembly.
  2. Disconnect strut assembly. Disconnect brake hose at brake line bracket. Remove trailing arm-to-axle carrier bolts, pull out brake cable and remove trailing arm.
scientia non olet · About LEMON Manuals