LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1983 >> 320i Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Disc Pads >> Removal

Disc Pads: Removal

  1. Raise and support vehicle. Remove wheel and tire. Disconnect pad wear sensors. Bend open fastener, and pull out. Drive out retaining pin toward inside of vehicle. Remove cross spring.
  2. Using extractor tool, remove pads from caliper. If pad thickness has worn to .080" (2 mm), replace pads. Only replace pads in matched sets.
scientia non olet · About LEMON Manuals