LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1982 >> 733i Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 528E, 633CSI & 733I 6-Cylinder >> Pistons, Pins & Rings >> Oil Pan >> Removal (733i)

Removal (733i)

  1. Drain engine oil. Remove wire from oil level switch and detach from oil pan. Remove power steering pump with hoses connected. Remove mounting bracket attached to oil pan and front cover.
  2. Remove nuts from left and right engine mounts. Remove engine damper. Remove fan housing from radiator. Install engine hoist and chain to engine. Raise engine to provide clearance for oil pan removal. Remove oil pan.
scientia non olet · About LEMON Manuals