LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1982 >> 733i Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 528E, 633CSI & 733I 6-Cylinder >> Engine & Cylinder Head >> Manual Transmission >> Installation

Manual Transmission: Installation

  1. To install, reverse removal procedure. When installing propeller shaft, use new lock nuts at rubber coupling. Only tighten nuts (never bolts) to avoid stress on coupling.
  2. When installing propeller shaft, push center support bearing forward 0.08" (2.0 mm) to preload bracket, then tighten nuts.
scientia non olet · About LEMON Manuals