LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1982 >> 733i Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 528E, 633CSI & 733I 6-Cylinder >> Camshaft >> Timing Chain & Sprockets >> Removal (633CSi & 733i)

Removal (633CSi & 733i)

  1. Remove distributor. Remove upper engine front cover. Rotate crankshaft until No. 1 cylinder is on TDC at end of compression stroke. Timing mark on front cover should align with notch in vibration damper.
  2. Remove camshaft sprocket with timing chain attached. Remove chain from camshaft and crankshaft sprockets.
  3. If crankshaft sprocket removal is necessary, remove oil pan. Remove oil pump sprocket and drive chain. Remove Woodruff key from crankshaft. Using a puller, remove crankshaft sprocket.
scientia non olet · About LEMON Manuals