LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1982 >> 733i Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axles - BMW - Integral Carrier >> Removal & Installation >> Axle Shafts & Bearings >> Installation

Axle Shafts & Bearings: Installation

  1. To install, reverse removal procedure noting the following: Install inner bearing. Determine distance between outer races of inner and outer bearings.
  2. Measure spacer and shim. Install a spacer and shim that will obtain specified axle shaft end play. Pack bearings and hub with grease. Using new seals, complete installation procedure.
scientia non olet · About LEMON Manuals