LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1971 >> 2800CS Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> BMW Engines - 2500, 2800, 3.0 & BAVARIA 6 Cylinder >> Thrust Bearing Alignment

Thrust Bearing Alignment

  1. With flywheel installed, check crankshaft end play. If end play exceeds 0.0069" (0.174 mm), an oversize thrust bearing must be installed.
  2. Standard thrust bearing width is 1.1820-1.1836". Thrust bearings are available with widths 1.1900-1.1915" and 1.1980-1.1996" oversize.
scientia non olet · About LEMON Manuals