LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1971 >> 2800CS Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> BMW Engines - 2500, 2800, 3.0 & BAVARIA 6 Cylinder >> Front Intake Manifold Removal

Front Intake Manifold Removal

  1. Disconnect battery ground cable and drain cooling system. Remove air cleaner and disconnect fuel and vacuum lines to carburetor. Disconnect accelerator linkage and support bracket.
  2. Disconnect electrical connection from automatic choke. Remove vacuum hose for brake servo and water hoses from cover. Loosen dip stick support bracket. Remove intake manifold.
  3. To install, reverse removal procedure. Make sure rotary shaft has some side clearance.
scientia non olet · About LEMON Manuals